Printing area on tube

(1)Product may shrink by 2.0% following production

(2)1.5mm must be reserved for circumference printing

(3)Standard xize for eye mark is 2.0mm x 7.0mm, othersizes  are available on request

(4)No print area next to the tube shoulder is 3mm, no print aera on the tube tail is 5mm,  they can be adjusted according to the requirement.

SPecifications and Capacities

(1)  Tube diameter is set,length can be adjusted

(2) Specifications are for reference only,and customer sizes are available

(3) Above tube length are the testingresult after the sealing,if customer seals the tubes by himself,the tube length should increase 10-20mm.